Parachute dynamics and perturbation analysis of precision airdrop system

To analyze the parachute dynamics and stability characteristics of precision airdrop system,the fluid–structure interaction(FSI) dynamics coupling with the flight trajectory of a parachute–payload system is comprehensively predicted by numerical methods.The inflation behavior of a disk-gap-band parachute is specifically investigated using the arbitrary Lagrangian–Euler(ALE) penalty coupling method.With the available aerodynamic data obtained from the FSI simulation,a nine-degree-of-freedom(9DOF) dynamic model of a parachute–payload system is built and solved to simulate the descent trajectory of the multi-body dynamic system.Finally,a linear five-degree-of-freedom(5DOF) dynamic model is developed,the perturbation characteristics and the motion laws of the parachute and payload under a wind gust are analyzed by the linearization method and verified by a comparison with flight test data.The results of airdrop test demonstrate that our method can be further applied to the guidance and control of precision airdrop systems.     

Flight safety measurements of UAVs in congested airspace

Describing spatial safety status is crucial for high-density air traffic involving multiple unmanned aerial vehicles (UAVs) in a complex environment. A probabilistic approach is proposed to measure safety situation in congested airspace. The occupancy distribution of the airspace is represented with conflict probability between spatial positions and UAV. The concept of a safety envelope related to flight performance and response time is presented first instead of the conventional fixed-size protected zones around aircraft. Consequently, the conflict probability is performance-dependent, and effects of various UAVs on safety can be distinguished. The uncer-tainty of a UAV future position is explicitly accounted for as Brownian motion. An analytic approximate algorithm for the conflict probability is developed to decrease the computational consumption. The relationship between safety and flight performance are discussed for different response times and prediction intervals. To illustrate the applications of the approach, an experi-ment of three UAVs in formation flight is performed. In addition, an example of trajectory planning is simulated for one UAV flying over airspace where five UAVs exist. The validation of the approach shows its potential in guaranteeing flight safety in highly dynamic environment.     

基于飞行签派员的航空公司运行效率提升研究

航空公司运行控制中心是航空公司的核心,而飞行签派员又是运行控制中心的核心,运行控制中心的 效率直接影响到航空公司的运行安全与效益。根据航空公司飞行签派员的特点和管理现状,对效率量化和效 率评估进行分析研究,采用改进层次分析法(AHP)和物元可拓模型相结合的方法,建立适合我国航空公司飞 行签派员运行效率评估模型;针对评价指标在实际情况下更具有针对性和可操作性,提出4项准则和16项指 标组成的基于签派员航空公司运行效率评价指标体系,并进行算例分析。结果表明:所构建的评价指标体系合 理有效,能够真实反映出航空公司的运行效率与飞行签派员、运控设备、AOC组织结构与工作环境和航空公司 管理规定有着密切联系,为公司运行效率的提升提出理论依据。     

飞行载荷发展综述

飞行载荷设计是飞行器设计的一个重要组成部分,是连接总体气动设计和结构强度设计的桥梁。本 文从飞行载荷设计所需要遵循的规范、飞行载荷的设计方法、严重载荷选取、飞行载荷的验证等方面对飞行器 飞行载荷设计的发展历程进行了回顾,并对未来飞行载荷的发展方向进行了展望。     

配对进近模式分析及研究进展

配对进近模式是在近距平行跑道上运行的,旨在提高仪表气象条件下的进场效率的一种高效进近模 式,该模式的完整流程在国内鲜有阐述。本文重点分析配对进近程序在近距平行跑道上运行时各阶段的流程, 以及配对进近程序的实施对机型、设备以及人员的具体要求;结合目前国内近距平行跑道的运行情况,国际上 对配对进近模式的研究和应用现状,指出我国引进配对进近模式的迫切性以及该模式今后的研究和发展趋势。     

民航飞机放行评估实验教学方法研究

飞机放行评估是航空公司进行运行控制的一项重要内容，它直接决定了航空公司运行和服务的质量。文中通过对中国民航大学现有的教学资源和现用的教学方法进行介绍，并进一步提出改革建议，从而有助于更好地搭建实验平台，提高教学质量。     

飞行中大气瞬时温度的获取

根据＊＊飞机上，ＣＷ－１００２和Ⅱ－５的试飞结果，对两种产品的性能做了对比分析；对飞行中大气温度的获取方法提出了的新意见。     

Angles-only relative orbit determination in low earth orbit

The paper provides an overview of the angles-only relative orbit determination activities conducted to support the Autonomous Vision Approach Navigation and Target Identification (AVANTI) experiment. This in-orbit endeavor was carried out by the German Space Operations Center (DLR/GSOC) in autumn 2016 to demonstrate the capability to perform spaceborne autonomous close-proximity operations using solely line-of-sight measurements. The images collected onboard have been reprocessed by an independent on-ground facility for precise relative orbit determination, which served as ultimate instance to monitor the formation safety and to characterize the onboard navigation and control performances. During two months, several rendezvous have been executed, generating a valuable collection of images taken at distances ranging from 50?km to only 50?m. Despite challenging experimental conditions characterized by a poor visibility and strong orbit perturbations, angles-only relative positioning products could be continuously derived throughout the whole experiment timeline, promising accuracy at the meter level during the close approaches. The results presented in the paper are complemented with former angles-only experience gained with the PRISMA satellites to better highlight the specificities induced by different orbits and satellite designs.     

Crew autonomy for deep space exploration: Lessons from the Antarctic Search for Meteorites

Future piloted missions to explore asteroids, Mars, and other targets beyond the Moon will experience strict limitations on communication between vehicles in space and control centers on Earth. These limitations will require crews to operate with greater autonomy than any past space mission has demonstrated. The Antarctic Search for Meteorites (ANSMET) project, which regularly sends small teams of researchers to remote parts of the southern continent, resembles a space mission in many ways but does not rely upon a control center. It provides a useful crew autonomy model for planners of future deep space exploration missions. In contrast to current space missions, ANSMET gives the crew the authority to adjust competing work priorities, task assignments, and daily schedules; allows the crew to be the primary monitor of mission progress; demands greater crew accountability for operational errors; requires the crew to make the most of limited communication bandwidth; adopts systems designed for simple operation and failure recovery; and grants the crew a leading role in the selection and stowage of their equipment.     

变形飞行器建模及控制方法研究综述

针对变形飞行器的发展现状、气动建模、动力学建模以及控制方法研究进行了综述。首先阐述了变形飞行器的定义及变形需求,再从四个方面梳理了变形飞行器的技术优势。针对不同的机翼变形方式,对飞行器各种变形技术的特点及发展现状进行了详细的分析与总结;将变形飞行器与固定外形飞行器的气动机理进行了对比分析,并对变形飞行器的动力学建模方法进行了梳理,总结了各种方法的特点;结合变形飞行器自身特性分析了飞行控制的特点及难点,并详细阐述了各类变形飞行器的控制研究进展。最后总结分析了变形飞行器的发展趋势：深化基础理论与技术研究,从材料、结构及控制等领域全方面朝着智能化方向发展,最终实现变形飞行器的工程化、自主化、智能化应用。